APPLICATIONS

Direct Savings

Temperature identification Screen colour and degrees enable users to easily identify temperature. The user does not have to deal with trial and error tap handle processes to achieve the desired comfort temperature.
PAUSE function Usage parameters keep stored in the system. Once the service point starts again after PAUSE, it maintains the previously selected parameters.
Flow regulation
Flow regulation
Overall flow decrease not to exceed water rate consumption bands.
Reducing flow in case of peak occupancy or number of users.
 Temperature regulation
Online and real time setting and application of the maximum comfort temperature in each service point and at any time.
 No water consumption rates at unnecessarily high temperature levels.
Self-closing programming
Online and real time self-closing programming in those service points where usage must be time limited.
 WCs and urinals flow discharge time reduction.
Different self-closing programmes available on screen.
Time of use regulation
Online and real time definition of maximum time of use in each service point and at any time.
 Maximum time of use programming of showers, toilets, etc.
Showers time of use regulation by user.
Service points unable to remain open.
Service point setting up by deliverable water volume
Accurate definition of water volume delivery in each user demand.
 Programming for accurate bath filling and automatic stop.
Water volume reduction for WCs and urinals discharges.
Function programming
Flow, temperature, self-closing, etc. programming for specific uses.
 Tooth brush function programming.
Shaving function programming
Alarm implementation
Alarm generation in the event of fault, misuse, abuse, etc.
 Water leakage detection.
Service point consumption abuse detection.
Service point malfunction detection.
Faults detection.
Complementary systems integration
 The system can receive data from external devices.  Alignment of presence sensors leading to selected service points automate closure in the event of empty rooms.
Alignment of temperature sensors leading to regulate water flow maximum temperature considering outer temperature.
Cleaning and maintenance staff identification
 Discrimination between users and staff is available through different systems.
Water volume and temperature regulation to control water cleaning consumption.
Self-contained smart valve
The valve reacts to pressure, flow or temperature fluctuations and provides ongoing supply of the requested flow and temperature.
The system prevents users from correction processes in which hot and cold water is consumed.
 Installation
Only one pipe (mixed up water) is installed from the collector to the service point.
40% saving in plumbing and workforce bathroom installations.
Users identification
 Touch screens enable users identification.
Usage parameters storage by user.
 Consumption rates management available to users.
Timing/flow/temperature/consumption regulation by user.
Water consumption billing.
The user forgets about comfort temperature and flow tests.
Alarms
 Effective leakage and faults detection.
Misuse detection.
 Water consumption reduction thanks to timely leakage detection.
Immediate knowledge of misuse and vandalism enable water consumption reduction.
Abnormal water usage reporting automatically emailed to a designated address.